The new 48-bit Sound processor from Pioneer allow users to optimize the sound quality of their factory fitted audio System. It not only adds clarity to the stock system’s sound, but it also gives various sound tuning options to the user. All the audio setting can be intuitively controlled by smartphone.
Universal Sound Processor with easy control with Android and iOS.
The output of factory fitted stereo is tuned to match the factory fitted speakers, therefore even when the speakers are replaced, the sound from the higher quality speakers will still be limited. Pioneer sound processor can cancel the factory audio tuning and create an altogether new sound stage that’s best suitable to the new speakers and car interior.
Controls of the processor can be done through Pioneer’s app called Sound Tune. The app is quiet easy to understand and user. For the factory fitted units that donot support music playback from smartphone, the processor can play music too with USB connection. The app is available for both Android and iPhone
This universal sound processor incorporates Pioneer's full-custom high-performance 48-bit dual-core DSP for high-quality sound reproduction. An internal clock and pattern are optimally tuned. Sound degradation from jitter noise is thoroughly eliminated.
Pioneer sound processor offers an easy plug & play connection. The specially developed wire harness connects the factory fitted system with the processor without any hassles. This Wire harness derives Power and audio signal for the processor. The Audio signal can then be tuned as per the user’s preference with an interactive smartphone app.
The extremely compact size of the processor makes the installation easy and neat. The processor can fit in the glove box, under the front passenger seat or behind the factory fitted stereo if there is a space.
Download the Sound Tune App in your smartphone and then connect the phone with processor to do the settings.
For using Source Callibration feature, a test signal is required. Please download it from this link. Test signal is available in two formats (mp3 & wav)
There are specific connection patterns that can be used for powering different speakers and subwoofers.
You can enjoy different sound effects like concert hall, Open air & more with this processor when the smartphone is connected.
You can connect multiple amplifiers with the processor using 3 Hi volt pre outs.
You can adjust cutoff frequency and cutoff slope for each HPF (front/Rear speaker seperately) and LPF (subwoofer) respectively.
13 Band EQ adjustment allows you to fine-tune sound quality just as you like it.
User can build a 3-way multi-amplifier/multi-speaker system and switch between the configurations using network mode.
Providing up to 1.5 amperes to give an Android smartphone a quick charge.
Pioneer's original amplifier makes sure to provide great sound quality.
Click to expand
Standard Mode- Front/Rear (HPF)- Frequency: 50Hz, 63Hz, 80Hz, 100Hz, 125Hz, 160Hz, 200Hz
Standart Mode- Sub woofer (LPF)- Frequency: 50Hz, 63Hz, 80Hz, 100Hz, 125Hz, 160Hz, 200Hz
Standart Mode- Sub woofer (LPF)- Gain: -24 - +10dB (1dB/Step)
Standart Mode- Sub woofer (LPF)- Phase: Normal/Reverse
Standard Mode- Speaker level: -24 - +10dB (1dB/Step)
Standard Mode- Time Alignment: 0cm - 350cm (2.5 cm/step)
Network Mode- High (HPF)- Frequency: 1.25kHz, 1.6kHz, 2kHz, 2.5kHz, 3.15kHz, 4kHz, 5kHz, 6.3kHz, 8kHz, 10kHz, 12.5kHz
Network Mode- Mid (LPF)- Frequency: 1.25kHz, 1.6kHz, 2kHz, 2.5kHz, 3.15kHz, 4kHz, 5kHz, 6.3kHz, 8kHz, 10kHz, 12.5kHz
Network Mode- Sub woofer (LPF)- Frequency: 25Hz, 31.5Hz, 40Hz, 50Hz, 63Hz, 80Hz, 100Hz, 125Hz, 160Hz, 200Hz, 250Hz
Network Mode- Sub woofer (LPF)- Slope: 0dB(Pass), -12dB/oct, -18dB/oct, -24dB/oct, -30dB/oct, -36dB/oct
Network Mode- Speaker level: -24 - +10dB (1dB/Step)
Network Mode- Time Alignment: 0cm - 350cm (2.5 cm/step)
USB standard spec.: USB2.0 High Speed
Max current supply: 1.5A
Max power: 50W x 4 (50Wx2ch/4Ω + 70Wx1ch/2Ω for SUB-WOOFER)
Continuos power: 22W x 4 (50Hz to 15kHz, 5%THD, 4Ω LOAD, Both Channels Driven)
Load impedence: 4Ω (4 - 8Ω(2Ω for 1ch) allowable)
Preout Output Level (Max): 4.0V
Preout Impedence: 250Ω
Preout Frequency response: 10Hz to 20kHz (+0dB , -1dB)
Preout S/N Ratio: 105 dB
Preout THD: 0.01%
Equalizer (13Band Graphic Equalizer) frequency: 50Hz, 80Hz, 125Hz, 200Hz, 315Hz, 500Hz, 800Hz, 1.25kHz, 2kHz, 3.15kHz, 5kHz, 8kHz, 12.5kHz ±12dB(0.1dB step)
Power Source: 14.4V DC (10.8-15.1V allowable)
Grounding System: Negative type
Max. current consumption: 9.2A
Dimensions: 170(W) x 40(H) x 95(D
Yeanub Mollik.1987 on 07 Jun, 2020
Saravanakumar G on 14 Oct, 2019
best processor in the world and affordable price
Charles Joseph on 24 Jul, 2019
This amazing superb I cant tell more speech less superb superb
syed roshan on 26 Jun, 2019
A little software upgrade needed
The processor works fine when played using mobile but in the connection through the factory unit the punchy bass effect is totally clipped off Giving only a roaring bass
gogulanath sivaprakasam on 21 Mar, 2019
Mohit Kumar on 15 Sep, 2018