VREC-H120SC
MRP. ₹5,399/-
A Compact Car Dashboard Camera with 1.5K resolution and a 120° wide-angle view for a clear, wide view of the road. Easy to install and elegantly designed for a seamless fit in any vehicle.
MRP. ₹5,399/-
A Compact Car Dashboard Camera with 1.5K resolution and a 120° wide-angle view for a clear, wide view of the road. Easy to install and elegantly designed for a seamless fit in any vehicle.
Car Dashboard Camera with 2MP 1296p Video resolution, Wide Dynamic Range, 120° Field of View with in-built Wi-Fi and G-sensor, Emergency Recording, Supports up to 128 GB external storage.
Stay protected with the dash camera that doesn’t miss a moment. With sharp Full HD recording, 120° wide-angle view, and superior night vision, the Pioneer VREC-H120SC is your reliable co-pilot. Whether it’s the scenic drive or unexpected moments, this dash cam has you covered—day or night. Equipped with built-in Wi-Fi for easy sharing and access, a G-sensor for emergency recording during sudden impacts, and support for up to 128 GB external storage, you’ll never have to worry about missing critical footage.
User has to switch to 1,5K resolution through the app
Disclaimer
Capture every details, from the brightest highlights to the deepest shadows, for stunning, lifelike videos. Every time.
Stay protected with our built-in G sensor technology that automatically saves crucial footage during emergencies.
Capture more of the World around you with a 120° Field of View
Record photos even when the vehicle is parked and the engine is turned off. Record videos on impact-detection during parking.
Disclaimer
Our dash camera uses H.265 (HEVC) technology to record high-quality videos while using significantly less storage space. This allows you to save more recordings on the same memory card without compromising clarity.
Supports upto 128GB external storage.
31.12mm x 28.8mm x 37.33mm
1296P (1,5K)
2MP
120° Diagonal
Yes, Inbuilt
Android/iOS
Yes, Inbuilt
Up to 128GB
5V , 1.5 A Cigarette charger or Hardwire Kit (To be purchased separately )
Yes (Hardware Kit Required)
Open the Zen Vue Dash Camera app.
Select the model name, which you want to connect.
Your phone will redirect you to its Wi-Fi settings.
Select the Wi-Fi network named Pioneer_XXX_XXX. The “XXX” represents the dashcam model or device number.
Enter the default password: 12345678.
Return to the Zen Vue Dash Camera app to complete the connection.
A warning message will appear reminding you to keep your eyes on the road while driving.
The dashcam will ask whether you want to change the Wi-Fi password. Select “Yes” if you want to change it, or select “No” to continue with the default password.
This is the interface displayed after the dashcam is successfully connected.
Open the Zen Vue Dash Camera app.
Select the model name, which you want to connect.
Connect the dashcam to the app
Open the “Gallery” section in the app. You will see two options: “Downloaded Videos” and “MicroSD Card”.
The MicroSD Card section contains the recorded videos in 1-minute time-lapse segments.
Press the dashcam power button 5 times.
This will reset the dashcam and restore all settings to their default values.
Note: Resetting the dashcam does not erase recordings stored on the SD card.
To update the software, first connect the dashcam to the app.
In the app, tap the three horizontal lines in the top-left corner and select “Download Software Version”.
You may be asked to disconnect your smartphone from the dashcam so the app can check for the latest software version.
If a new software version is available, the app will ask you to download it to your mobile phone first.
After downloading, reconnect the dashcam to the app and install the software on the dashcam.
Note: Do not disconnect the app from the dashcam while the software installation is in progress.
To check the current software version of your dashcam:
Go to the “Settings” option.
The Settings menu contains the available options for configuring your dashcam.
Scroll down to the last option, “Device Information”.
In “Device Information”, you can view the current software version of your dashcam.
To enable Parking Mode, make sure your dashcam is connected to a compatible hardware kit. The recommended hardwire kit is RD-HWK300. After installing the hardwire kit:
Enable the “Parking Mode” option from the Live View section.
Parking Mode is turned off by default.
If the Parking Mode option is greyed out, the hardwire kit may not have been installed correctly. Please have the installation checked.
Note: The camera does not record continuously in Parking Mode. When the ignition is turned off, the dashcam enters standby mode and starts recording when an impact is detected.
* Login required to submit review
